Grinding Diameter : 100～600 mm
Grinding Speed : ≤ 15 teeth/min
Grinding Tooth Pitch : 8～50mm
Tangent Angel : - 5°～ + 15°
Radial Angle : -3°～ 5°
Top Bevel Angle : ≤ 45°
Output Power : 2.6 KW
Input Power : THREE PHASE,380V/50Hz

1.Saw grinding machines tools of this type grind the two sides angle at the same time , aviod the error caused by the different force ;high precision and efficiency .They are suitable for batch process.Several machine tools can be operated simutaneously by one person.

2.The front angle rise and down electrically ,Saw grinding machine,saving the time and the labors.The acute angles and the radial angles of the two sides can adjust separately, knife head meeting the center point can be adjusted , through adjusting the pad pressure or the single grinding head . Double grinding heads design is ball slide way entering and rectilinear slide way.Entering is exactly and symmetrically.

3.Hydraulic system consists of the accumulator ,the oil pump of setting tooth,and the oil pump of way to insuring the machine running steadily and in-phase. And the dimension and precision of the cutting head were protected effectively .The Saw grinding machines PLC output adopts the band two protection designs and the outout point has a long life-span.]

4.The center Lubricating system could put on steam automatically or manually.The Mechanism of Setting tooth , the Mechanism of Pressed Pad and the Mechanism of Hung pad have out side point to lubricate oil.